Posts

LINSTOR OpenStack Banner

How to Setup LINSTOR in OpenStack

This post will walk through the installation and setup procedures for deploying LINSTOR for a persistent, replicated, and high-performance source of block storage within DevStack version of OpenStack running on an Ubuntu host. We will refer to this Ubuntu host as the LINSTOR Controller. This setup also requires at least one additional Ubuntu node handling replicated data, and we will refer to this node as the LINSTOR Satellite. You may have more than one satellite nodes for increased redundancy.

Initial Requirement

The LINSTOR driver is a messenger between the underlying DRBD/LINSTOR and OpenStack. Therefore, both DRBD/LINSTOR as well as OpenStack must be pre-installed and configured. Once LINSTOR is installed, each node must be registered with LINSTOR and have a predefined storage pool on a thin LVM volume.

Install DRBD / LINSTOR on OpenStack Cinder node as a LINSTOR Controller node

# First, download and run a python script to enable LINBIT repo
curl -O 'https://my.linbit.com/linbit-manage-node.py'
chmod u+x linbit-manage-node.py
./linbit-manage-node.py

# Install the DRBD, LINSTOR, and LVM packages
sudo apt install -y drbd-dkms lvm2
sudo apt install -y linstor-controller linstor-satellite linstor-client
sudo apt install -y drbdtop

Configure the LINSTOR Controller

# Start both LINSTOR Controller and Satellite Services
systemctl enable linstor-controller.service
systemctl start linstor-controller.service
systemctl enable linstor-satellite.service
systemctl start linstor-satellite.service

# Create backend storage for DRBD/LINSTOR by creating a Volume Group 'drbdpool'
# Specify appropriate volume location (/dev/vdb)
sudo vgcreate drbdpool /dev/vdb

# Create a Logical Volume 'thinpool' within 'drbdpool'
# Specify appropriate thin volume size (64G)
sudo lvcreate -L 64G -T drbdpool/thinpool

Install DRBD / LINSTOR on all other LINSTOR Satellite node(s)

# First obtain and install DRBD / LINSTOR packages through LINBIT
# by running python script
sudo apt install -y drbd-dkms lvm2
sudo apt install -y linstor-satellite
sudo apt install -y drbdtop

Configure the LINSTOR Satellite node(s)

# Start LINSTOR Satellite Service
systemctl enable linstor-satellite.service
systemctl start linstor-satellite.service

# Create backend storage for DRBD/LINSTOR by creating a Volume Group 'drbdpool'
# Specify appropriate volume location (/dev/vdb)
sudo vgcreate drbdpool /dev/vdb

# Create a Logical Volume 'thinpool' within 'drbdpool'
# Specify appropriate thin volume size (64G)
sudo lvcreate -L 64G -T drbdpool/thinpool

Configure LINSTOR cluster (nodes and storage pool definitions) from the Controller node

# Create the controller node as combined controller and satellite node
linstor node create cinder-node-name 192.168.1.100 --node-type Combined

# Create the satellite node(s)
linstor node create another-linstor-node 192.168.1.101
# repeat to add more satellite nodes in the LINSTOR cluster

# Create LINSTOR Storage Pool on each nodes
# For each node, specify node name, its IP address, 
# storage pool name (DfltStorPool) and volume type (lvmthin)

# On the LINSTOR Controller 
linstor storage-pool create lvmthin cinder-node-name DfltStorPool \
    drbdpool/thinpool
# On the LINSTOR Satellite node(s)
linstor storage-pool create lvmthin another-linstor-node DfltStorPool \
    drbdpool/thinpool
# repeat to add a storage pool to each node in the LINSTOR cluster

 

Cinder Driver Installation & Configuration

Download the latest driver (linstordrv.py)

wget https://github.com/LINBIT/openstack-cinder/blob/stein-linstor/cinder/
volume/drivers/linstordrv.py

Install the driver file in the proper destination

/opt/stack/cinder/cinder/volume/drivers/linstordrv.py

Configure OpenStack Cinder by editing /etc/cinder/cinder.conf
to enable LINSTOR driver by adding ‘linstor’ to enabled_backends

[DEFAULT]
...
enabled_backends=lvm, linstor
…

Then, add a LINSTOR section at the bottom of the cinder.conf

[linstor]
volume_backend_name = linstor
volume_driver = cinder.volume.drivers.linstordrv.LinstorDrbdDriver
linstor_default_volume_group_name=drbdpool
linstor_default_uri=linstor://localhost
linstor_default_storage_pool_name=DfltStorPool
linstor_default_resource_size=1
linstor_volume_downsize_factor=4096
linstor_controller_diskless=False
iscsi_helper=tgtadm

Update Python libraries

sudo pip install protobuf --upgrade
sudo pip install eventlet --upgrade

Register LINSTOR with Cinder

cinder type-key linstor
cinder type-key linstor set volume_backend_name=linstor

Lastly, restart Cinder services

sudo systemctl restart [email protected]
sudo systemctl restart [email protected]
sudo systemctl restart [email protected]

 

Verification of proper installation

Check system journal for any driver errors

# Check if there is a recurring error after restart
sudo systemctl -f -u [email protected]* | grep error

Create a test volume with LINSTOR backend

# Create a 1GiB volume through Cinder and verify LINSTOR backing exists
openstack volume create --type linstor --size 1 --availability-zone nova \
    linstor-test-vol
openstack volume list
linstor resource list

Delete the test volume

# Delete the test volume and verify if LINSTOR removed resources correctly
openstack volume delete linstor-test-vol
linstor resource list

 

Final Comments

By now, the LINSTOR driver should have successfully created a Cinder volume and the matching LINSTOR resources on the backend and then removed them from Cinder. From this point on, managing LINSTOR volumes should be a breeze with OpenStack Horizon’s GUI interface.

Management of LINSTOR snapshots and creation of LINSTOR volumes from those snapshots are also possible. Once a LINSTOR volume becomes available, it can then be made accessible within a Nova instance by creating an attachment. Any LINSTOR-backed volume can then provide replicated and persistent storage.

Please direct any questions regarding the specifics about the driver to Woojay Poynter at [email protected]. For any inquiry regarding DRBD and LINSTOR technology please contact our sales team at [email protected].

Feel free to check out this demonstration of LINSTOR volume management in OpenStack:

 

Woojay Poynter
IO Plumber
Woojay is working on data replication and software-defined-storage with LINSTOR, built on DRBD @LINBIT. He has worked on web development, embedded firmwares, professional culinary education, power carving with ice and wood. He is a proud father and likes to play with legos.

Why you should use LINSTOR in OpenStack

With the LINSTOR volume driver for OpenStack, Linux storage created in OpenStack Cinder can be easily provisioned, managed and seamlessly replicated across a large Linux cluster.

LINSTOR is an open-source storage orchestrator designed to deliver easy-to-use software-defined storage in Linux environments. LINSTOR uses LINBIT’s DRBD to replicate block data with minimal overhead and CPU load. Managing a LINSTOR storage cluster is as easy as a few LINSTOR CLI commands or a few lines of Python code with the LINSTOR API.

LINSTOR pairs with Openstack

OpenStack paired with LINSTOR brings even greater power and flexibility by enabling Linux to become your SDS platform. Replicate storage wherever you need it with simple mouse clicks. Provision snapshots. Create new volumes with those snapshots. LINSTOR volumes can then be paired with the right compute nodes just as easily. Together, OpenStack and LINSTOR bring tremendous potential to provide robust infrastructure with ease, all powered by open-source.

Data replicated with LINSTOR can minimize downtime and data loss. Running your cloud on commodity hardware with the native Linux features underneath provides the most flexible, reliable, and cost-effective solution to hosting customized OpenStack deployment anywhere.

In addition to storage management and replication, LINBIT also offers Geo-Clustering solutions that work with LINSTOR to enable long-distance data replication inside private and public cloud environments.

For a quick recap, please check out this video on deploying LINSTOR volumes with OpenStack’s Horizon GUI.

More information about LINBIT’s DRBD and LINSTOR visit:

For LINSTOR OpenStack Drivers
https://github.com/LINBIT/openstack-cinder

For LINSTOR Driver Documentation:
https://docs.linbit.com/docs/users-guide-9.0/#ch-openstack-linstor

For LINBIT’s LINSTOR webpage:
https://www.linbit.com/en/linstor/

 

Woojay Poynter
IO Plumber
Woojay is working on data replication and software-defined-storage with LINSTOR, built on DRBD @LINBIT. He has worked on web development, embedded firmwares, professional culinary education, power carving with ice and wood. He is a proud father and likes to play with legos.

LINSTOR is officially part of OpenStack

It’s Official. LINSTOR Volume Driver is Now a Part of OpenStack Cinder.

It’s Official. LINSTOR volume driver is now part of OpenStack.

With this code merge, LINSTOR volume driver is now officially part of OpenStack and brings a new level of software-defined-storage (SDS) service to Cinder, the OpenStack’s volume service. 

While the next OpenStack release named ‘Stein’ won’t be out until April, the latest LINSTOR driver is already available on our GitHub repo.

Stay tuned for more news and updates from LINBIT.